Winchester model 1895 parts.

User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:11 am
Winchester model 1895 parts.

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?product=Winchester_1895&cart_id=1320332958.1727
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:13 am
AAA Winchester 1895 receiver screw identifier

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1131

These are the receiver screws for the winchester 1895. The large pic is of the type 2 receiver that was introduced after number 5000. The pink X is where the saddle ring hole would be located if the rifle was a carbine or was special ordered from the factory.

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:14 am
Buttplate Winchester flat metal 1895

This is a metal buttplate that fits on the newer model 1895 Winchester rifle. It is blued and comes with two matched screws.

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Buttplates&pid=977

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:15 am
Buttplate Winchester 1890 / 1894 / 1895 crescent metal (842)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Buttplates_Winchester_1890_Winchester_1906_Winchester_1894_Winchester_1895&pid=1099

This is the crescent metal buttplate for the winchester 1890 pump .22 and the 1894/ 1895 RIFLE. It comes with the screws and is raw- not blued. The chunk of metal that most other companies leave on has been taken off and the surface has been sanded smooth. You will have to do the final fine sand to blue it. It is exact replica of the original

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:16 am
Buttplate Winchester 1895 (bpw457)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Buttplates&pid=827

This is a raw steal checked buttplate with screws for winchester model 64 / 95 / 1887

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:18 am
Buttplate Winchester 1995 (829)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Buttplates&pid=1024

This is the flat buttplate with the spur for the Winchester mod 1895

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:19 am
Carbine Forearm Winchester 1895

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Stocks&pid=936

This is the forearm for the 1895 Winchester Carbine. I do not keep this in stock but can have one made for you. With or with out the Grooves. Just email me at jvr29@msn.com

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:20 am
Carrier spring - type 1- Winchester 1895 (wp7215)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1111

This is the TYPE 1 carrier spring for the Winchester 1895. This spring was used with the type one flarside receiver to circa serial number 50,000.

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:20 am
Ejector spring Winchester 1895 (wp7214)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1043

This is the ejector spring for the Winchester 1895. This spring provides the tension against the ejector needed to eject the cartridge case.

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:21 am
Elevators - Lever Action Winchesters 32-B (st23)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=919

This is the rear sight elevator for the lever action winchesters. It fits 1873, 1886, 1894 (pre and post 64) and 1895. Winchester called this the 32-B elevator. It fits into the slot on the sporting rear sights for the rifles.

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:22 am
Elevators -3C - Lever Action Winchesters (st24)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=1105

This is the rear sight elevator for the lever action winchesters. It fits 1873, 1886, 1894 (pre and post 64) and 1895. This is the 3C elevator and was added in the late 20's as a special for some guns. Later it became standard for the model 64's and model 94's

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:23 am
Finger lever catch plunger (wp727)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=898

This plunger is surrounded by the finger lever catch spring and presses against the catch to engage the milled slot in the finger lever and hold it under spring pressure until the lever is lowered.

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:24 am
Finger lever catch spring (wp721)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=897

This spring fits the Winchester model 1995 that used the type 1 & 2 finger levers. They are one piece lever that used a spring and plunger type lever catch on the trigger link to hold the finger lever closed. This spring coils around the finger lever catch plunger. (type 3 is not one piece).

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:25 am
Finger lever link pin Winchester 1895 (wp7213)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1045

This is the finger lever link pin for the Winchester 1895. It is a split pin and the flanges on each end retained the pin the the hole on the receiver.

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:26 am
Finger lever pin Winchester 1895 (wp7211)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1042

This is the finger lever pin for the Winchester 1895

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:30 am
Firing Pin Winchester 1895 (wp3295)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1076

This is the firing pin for the Winchester 1895

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:30 am
Firing pin lock (wp725)

[url]http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=902[/url

This is the part on the Winchester 1895 that (unlike mod94) does not fully block the rear of the breechbolt. It slides up into milled section on each side of the rear face. The rails leave and opening in the cener for the hammer to strike the fifing pin.

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:32 am
Firing pin lock pin (wp724)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=899

This pin retains the firing pin in the breechbolt on the Winchester 1895

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:33 am
Firing pin recoil lock (wp723)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=901

This sits inside the firing pin lock held in place by the firing pin lock pin on the Winchester 1895.

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:37 am
Forearm Stud Win 1895 (wp722)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=888

This is the stud for the Wnchester 1895 rifle. It is threaded to fit the forearm screw which attaches the forearm to the barrel.--(Note.. Carbine model forarm studs are not threaded and used only to stabalize the forearm while the barrel band hold the forearm in place)

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:38 am
Hammer screw Win 1895 (wp729)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=890

This is the screw that holds the hammer in place on the Winchester model 1895

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:38 am
Mainspring Winchester 1895 (735)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=885

This is the Mainspring (Hammer spring) for the Winchester Model 1895

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:39 am
Mainspring screw Winchester 1873 / 1895 / 1866 (621)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1873_Winchester_1895&pid=882

This is the screw that holds the Hammer spring (also called mainspring) in place on the Winchester 1873 and 1895 lever action rifles. It will also fit the 1866

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:40 am
Musket lower wood Winchester 1895

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Stocks&pid=918

This is the lower wood for the Winchester 1895 musket.

Image
User avatar
Administrator
Posts: 836
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:42 am
Saddle Ring and Stud Winchester 1873 / 1886 / 1892 / 1894 / 1895 (wp4)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=805

The complete saddle ring and stud fit (screw) directly into the left receiver side of any (pre 64) 1894 or 1892, 1895, 1886, 1873 Winchester saddle ring carbine.(NOTE: the screw in type saddle ring was not installed from the factory on the model 1892's- only the u shaped staples were used on the 1892's)

Image
Next

Return to Winchester Model 1895

Who is online

Users browsing this forum: No registered users and 3 guests

cron
Winchester Owners Forum is privately owned and operated. It is not affiliated or operated by Winchester company. Views and opinions expressed here are not necessarily that of Winchester.