Winchester model 1895 parts.

User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:38 am
Hammer screw Win 1895 (wp729)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=890

This is the screw that holds the hammer in place on the Winchester model 1895

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:38 am
Mainspring Winchester 1895 (735)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=885

This is the Mainspring (Hammer spring) for the Winchester Model 1895

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:39 am
Mainspring screw Winchester 1873 / 1895 / 1866 (621)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1873_Winchester_1895&pid=882

This is the screw that holds the Hammer spring (also called mainspring) in place on the Winchester 1873 and 1895 lever action rifles. It will also fit the 1866

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:40 am
Musket lower wood Winchester 1895

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Stocks&pid=918

This is the lower wood for the Winchester 1895 musket.

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:42 am
Saddle Ring and Stud Winchester 1873 / 1886 / 1892 / 1894 / 1895 (wp4)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=805

The complete saddle ring and stud fit (screw) directly into the left receiver side of any (pre 64) 1894 or 1892, 1895, 1886, 1873 Winchester saddle ring carbine.(NOTE: the screw in type saddle ring was not installed from the factory on the model 1892's- only the u shaped staples were used on the 1892's)

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:43 am
Saddle ring Winchester 1873 / 1886 /1892 / 1894 /1895 (wp5)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=806

This saddle ring fits into the saddle ring stud on the side of the 1894,1892,1886, 1895, 1876, & 1873 Winchester saddle-ring carbine.

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:44 am
Saddle ring stud Winchester 1873 / 1886 / 1892 / 1894 / 1895 (wp6)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=807

This saddle ring stud, screws directly into the left receiver side in any 1873, 1892, 1894, 1895, & 1886 saddle ring carbine.

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:45 am
Sear Spring (wp726)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=903

This is the sear spring for the Winchester 1895

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:47 am
Sear pin Win 1895 (wp728)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=889

The sear pin will fit both type 1 and Type 2 recievers on the Winchester model 1895

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 10:48 am
Sight - Front Winchester 1894 (st5)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=801

This is the front site for the 1894 Winchester. It fits onto the ramp on the end of the barrel. It has the Gold bead

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 1:53 pm
Sight - front- Marble gold bead .375 (st3)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1890_Winchester_1906_Winchester_62_winchester_62A_Winchester_1873_Winchester_1892_Winchester_1894_Winchester_1895_Winchester_61_Winchester_63_Winchester_69&pid=1287

This is the Marble front sight for the lever action, pump .22 or bolt action rifles. It fits into the 3/8 inch dovetail on the front of the barrel. This sight height is .375

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 1:54 pm
Sight - front- Marble white bead .375 (st4)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1890_Winchester_1906_Winchester_62_winchester_62A_Winchester_1873_Winchester_1892_Winchester_1894_Winchester_1895_Winchester_61_Winchester_63_Winchester_69&pid=1286

This is the Marble front sight for the lever action, pump .22 or bolt action rifles. It fits into the 3/8 inch dovetail on the front of the barrel. This sight height is .375

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 1:56 pm
Sight - front- Marble white bead .410 (st2)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1890_Winchester_1906_Winchester_62_winchester_62A_Winchester_1873_Winchester_1892_Winchester_1894_Winchester_1895_Winchester_61_Winchester_63_Winchester_69&pid=1283

This is the Marble front sight for the lever action, pump .22 or bolt action rifles. It fits into the 3/8 inch dovetail on the front of the barrel. This sight height is .410

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 1:57 pm
Sight - rear Marble Full buckhorn carbine (st14)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=1292

This is the rear Marble sight (num 65) for the lever action carbine rifles. It has a full buckhorn view that is adjustable with a screw. The elevator for this sight is part number st18

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 2:00 pm
Sight - rear Marble Full buckhorn rifle (st12)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=1288

This is the rear Marble sight (num 68) for the lever action rifles (measure fit if you have carbine) It has a full buckhorn view that is adjustable with a screw. The elevator for this sight is part number st17

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 2:02 pm
Sight - rear Marble Semi buckhorn rifle (st13)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=1289

This is the rear Marble sight (num 67H) for the lever action rifles (measure fit if you have carbine) It has a semi buckhorn view that is adjustable with a screw. The elevator for this sight is part number st18

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 2:03 pm
Sight - rear Marble flat top carbine (st16)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=1294

This is the rear Marble sight (num 63) for the lever action carbine rifles. It has a flat top view that is adjustable with a screw. The elevator for this sight is part number st18

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 2:05 pm
Sight - rear sporting folding (st8)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=1285

This is a Marble folding rear sight number 95. It fits into the 3/8 inch dovetail slot on the barrel and has a tension screw that allows you to fold the sight down to prevent damage. It also has a screw on the front to adjust the view slot up and down.

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 2:07 pm
Sight -rear - Sporting rifle - Winchester Lever action (st25)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=1063

This is a replacement rear site for the Winchester Lever action rifles. It uses the elevators st23 or st24. It fits into the 3/8 inch dovetail on the barrel

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 2:09 pm
Stock Carbine Winchester 1895 (stk95C)

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Stocks&pid=917

This is the stock for the Winchester 1895 Carbine. It is inlet for the carbine buttplate and little fitting is required. Beautiful stocks!!

Image
User avatar
Administrator
Posts: 924
Joined: Wed Apr 06, 2011 5:23 pm
Location: New York
PostPosted: Thu Nov 03, 2011 2:10 pm
Superior wood 1895 Carbine

http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Stocks&pid=916

This is the hard to find superior wood for the Winchester 1895 Carbine. Also called the hand gaurd or barrel cover.

Image
Next

Return to Winchester Model 1895

Who is online

Users browsing this forum: No registered users and 2 guests

cron
Winchester Owners Forum is privately owned and operated. It is not affiliated or operated by Winchester company. Views and opinions expressed here are not necessarily that of Winchester.