WinchesterOwners.com

3191 Winchester Model 42 Fancy Walnut 410g Set


http://shop.macongunstocks.com/3191-Winchester-Model-42-Fancy-Walnut-410g-Set-Winchester-42-3191.htm

Fancy Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

3192 Winchester Model 42 Fancy Walnut 410g Set


http://shop.macongunstocks.com/3192-Winchester-Model-42-Fancy-Walnut-410g-Set-Winchester-42-3192.htm

Fancy Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

3193 Winchester Model 42 Fancy Walnut 410g Set


http://shop.macongunstocks.com/3193-Winchester-Model-42-Fancy-Walnut-410g-Set-Winchester-42-3193.htm

Fancy Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Model 42 Example Walnut Stock


http://shop.macongunstocks.com/Winchester-Model-42-Example-Walnut-Stock-Winchester-42-Stock.htm

Example Walnut butt stock made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Butt stock available in Field, English Grip and Monte Carlo style. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Model 42 Example Walnut For end


http://shop.macongunstocks.com/Winchester-Model-42-Example-Walnut-For-end-Winchester-42-Forend.htm

Example Walnut for end made for Winchester Model 42 pump shotgun 410g. For end copied from Original Winchester OEM pattern. For end available in Deluxe Style, Corn Cobb with or with out rings and Later Flat Bottom with and with out rings. Machine inlet and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 English Walnut 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-English-Walnut-410g-Set-Winchester42-2541.htm

Winchester shotgun stocks Select English Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Matching for end not pictured but cut to style chosen. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Exhibition Walnut 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Exhibition-Walnut-410g-Set-Winchester42-2539.htm

Winchester shotgun stocks Exhibition Feather Crotch butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Extra Fancy Walnut 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Extra-Fancy-Walnut-410g-Set-Winchester42-2148.htm

Winchester shotgun stocks Extra Fancy Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Fancy English Walnut 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Fancy-English-Walnut-410g-Set-Winchester42-1717.htm

Winchester shotgun stocks Fancy English Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Matching for end not pictured but cut to style chosen. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Fancy Maple 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Fancy-Maple-410g-Set-Winchester42-2151.htm

Winchester shotgun stocks Fancy Maple butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Matching for end not pictured but cut to style chosen. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Fancy Maple 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Fancy-Maple-410g-Set-Winchester42-699.htm

Winchester shotgun stocks Fancy Maple butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Butt has right hand cheek piece. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Fancy Walnut 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Fancy-Walnut-410g-Set-Winchester42-2152.htm

Winchester shotgun stocks Fancy Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Matching for end not pictured but cut to style chosen. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Fancy Walnut 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Fancy-Walnut-410g-Set-Winchester42-931.htm

Winchester shotgun stocks Fancy Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Fancy Walnut 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Fancy-Walnut-410g-Set-Winchester42-2150.htm

Winchester shotgun stocks Fancy Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Fancy Walnut 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Fancy-Walnut-410g-Set-Winchester42-2149.htm

Winchester shotgun stocks Fancy Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Fancy Walnut 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Fancy-Walnut-410g-Set-Winchester42-1134.htm

Winchester shotgun stocks Fancy Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Butt has right hand roll over cheek piece and tear drop grip. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.

Winchester Shotgun Stocks Model 42 Fancy Walnut 410g Set


http://shop.macongunstocks.com/Winchester-Shotgun-Stocks-Model-42-Fancy-Walnut-410g-Set-Winchester42-1975.htm

Winchester shotgun stocks Fancy Walnut butt stock and matching for end made for Winchester Model 42 pump shotgun 410g. Butt stock copied from Original Winchester OEM pattern. Matching for end not pictured but cut to style chosen. Machine inlet, drilled for draw bolt and will require fit and finish. Wiped down with mineral spirits and is not finished.