Stock Care Question
12 posts
• Page 1 of 1
What is the best way to care for the wood on a new 92? Thanks!
What we lost in the fire, we will find in the ashes. Sam Chisholm
|
|
Renaissance Wax
44 |
|
Much thanks! Will get some. What we lost in the fire, we will find in the ashes. Sam Chisholm
|
|
That stuff works for me.
GOA Life Member
NRA Sustaining Member USMC Korea vet Retired CWO3 USCGR |
|
Good ol Simoniz paste wax works great as well and not to spendy either!
Noli Me Tangere
NRA Sustaining Member WACA Member |
|
The owner of the LGS where I work (a serious Marlin & Winchester lever rifle collector) tells me NOT to put any wax or oil on the stock in order to preserve its worth and natural look. I'm a tad torn here! Is this the conventional route to take? FWIW, it's doubtful I'll ever part with this treasure.
Thanks to all who replied to my initial question! I continue to welcome your advice!! What we lost in the fire, we will find in the ashes. Sam Chisholm
|
|
I still go with the quality wax. Most every option toward collecting firearms is subjective. I don't consider myself a collector. I have mostly early BB guns that could be considered collected and admire the glossy furniture on all my holdings.
Your gun, your call. GOA Life Member
NRA Sustaining Member USMC Korea vet Retired CWO3 USCGR |
|
Makes sense to me. Will definitely choose to wax. Thanks again! What we lost in the fire, we will find in the ashes. Sam Chisholm
|
|
If you go to WinchesterCollector.org and go to the forum, search about wax, you will find many high end collectors use wax. Many do use renaissance wax, and some as I use Simoniz (The Yellow Can), not spray can waxes. One thing to note about Simoniz, it is the purest wax you can buy with No chemical additives.
If you do use wax, take the butt plate off, forearm if possible, and hit areas normally left unfinished. Also, heat the wood with a heat lamp so as to make the wood absorb the wax into the pores. Use it on metal as well. Apply light coats, notice I said coats, and allow to soak into the wood. Wax will protect metal from possibly rusting. After it has dried, buff off. Remember two light coats are better than one heavy coat of wax. Gives a nice finish to the wood and after time will wear off with absolutely no ill effects. Do some research don't take folks word as gospel, and make a decision for yourself. Lots of good ideas, opinions and such on this forum as well. Good luck! Noli Me Tangere
NRA Sustaining Member WACA Member |
|
Thank you very much for the insightful and thus helpful reply! Much appreciated!! What we lost in the fire, we will find in the ashes. Sam Chisholm
|
|
Don't know about insightful or helpful, just another's opinion is all. That's what makes this forum a great place. What ever you decide to do make sure to make an update on what you decided to do and how ya did it.
Noli Me Tangere
NRA Sustaining Member WACA Member |
|
A good friend and custom gun shop owner here in Princeton, West Virginia, kindly applied one coat of a quality wax he uses to my 92. I was pleased with the outcome as there was no apparent change in the finish of the wood, but now it bears the benefit of some added protection! What we lost in the fire, we will find in the ashes. Sam Chisholm
|
|
12 posts
• Page 1 of 1
Return to Firearm Maintenance, Modification, Safety And Troubleshooting
Who is online
Users browsing this forum: No registered users and 10 guests
Winchester Owners Forum is privately owned and operated. It is not affiliated or operated by Winchester company.
Views and opinions expressed here are not necessarily that of Winchester.