Winchester model 1895 parts.
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?product=Winchester_1895&cart_id=1320332958.1727
Winchester model 1895 parts.
41 posts
• Page 1 of 2 • 1, 2
AAA Winchester 1895 receiver screw identifier
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1131 These are the receiver screws for the winchester 1895. The large pic is of the type 2 receiver that was introduced after number 5000. The pink X is where the saddle ring hole would be located if the rifle was a carbine or was special ordered from the factory. ![]() |
|
Buttplate Winchester flat metal 1895
This is a metal buttplate that fits on the newer model 1895 Winchester rifle. It is blued and comes with two matched screws. http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Buttplates&pid=977 ![]() |
|
Buttplate Winchester 1890 / 1894 / 1895 crescent metal (842)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Buttplates_Winchester_1890_Winchester_1906_Winchester_1894_Winchester_1895&pid=1099 This is the crescent metal buttplate for the winchester 1890 pump .22 and the 1894/ 1895 RIFLE. It comes with the screws and is raw- not blued. The chunk of metal that most other companies leave on has been taken off and the surface has been sanded smooth. You will have to do the final fine sand to blue it. It is exact replica of the original ![]() |
|
Buttplate Winchester 1895 (bpw457)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Buttplates&pid=827 This is a raw steal checked buttplate with screws for winchester model 64 / 95 / 1887 ![]() |
|
Buttplate Winchester 1995 (829)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Buttplates&pid=1024 This is the flat buttplate with the spur for the Winchester mod 1895 ![]() |
|
Carbine Forearm Winchester 1895
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Stocks&pid=936 This is the forearm for the 1895 Winchester Carbine. I do not keep this in stock but can have one made for you. With or with out the Grooves. Just email me at jvr29@msn.com ![]() |
|
Carrier spring - type 1- Winchester 1895 (wp7215)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1111 This is the TYPE 1 carrier spring for the Winchester 1895. This spring was used with the type one flarside receiver to circa serial number 50,000. ![]() |
|
Ejector spring Winchester 1895 (wp7214)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1043 This is the ejector spring for the Winchester 1895. This spring provides the tension against the ejector needed to eject the cartridge case. ![]() |
|
Elevators - Lever Action Winchesters 32-B (st23)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=919 This is the rear sight elevator for the lever action winchesters. It fits 1873, 1886, 1894 (pre and post 64) and 1895. Winchester called this the 32-B elevator. It fits into the slot on the sporting rear sights for the rifles. ![]() |
|
Elevators -3C - Lever Action Winchesters (st24)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Sights_and_Elevators_Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=1105 This is the rear sight elevator for the lever action winchesters. It fits 1873, 1886, 1894 (pre and post 64) and 1895. This is the 3C elevator and was added in the late 20's as a special for some guns. Later it became standard for the model 64's and model 94's ![]() |
|
Finger lever catch plunger (wp727)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=898 This plunger is surrounded by the finger lever catch spring and presses against the catch to engage the milled slot in the finger lever and hold it under spring pressure until the lever is lowered. ![]() |
|
Finger lever catch spring (wp721)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=897 This spring fits the Winchester model 1995 that used the type 1 & 2 finger levers. They are one piece lever that used a spring and plunger type lever catch on the trigger link to hold the finger lever closed. This spring coils around the finger lever catch plunger. (type 3 is not one piece). ![]() |
|
Finger lever link pin Winchester 1895 (wp7213)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1045 This is the finger lever link pin for the Winchester 1895. It is a split pin and the flanges on each end retained the pin the the hole on the receiver. ![]() |
|
Finger lever pin Winchester 1895 (wp7211)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1042 This is the finger lever pin for the Winchester 1895 ![]() |
|
Firing Pin Winchester 1895 (wp3295)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=1076 This is the firing pin for the Winchester 1895 ![]() |
|
Firing pin lock (wp725)
[url]http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=902[/url This is the part on the Winchester 1895 that (unlike mod94) does not fully block the rear of the breechbolt. It slides up into milled section on each side of the rear face. The rails leave and opening in the cener for the hammer to strike the fifing pin. ![]() |
|
Firing pin lock pin (wp724)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=899 This pin retains the firing pin in the breechbolt on the Winchester 1895 ![]() |
|
Firing pin recoil lock (wp723)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=901 This sits inside the firing pin lock held in place by the firing pin lock pin on the Winchester 1895. ![]() |
|
Forearm Stud Win 1895 (wp722)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=888 This is the stud for the Wnchester 1895 rifle. It is threaded to fit the forearm screw which attaches the forearm to the barrel.--(Note.. Carbine model forarm studs are not threaded and used only to stabalize the forearm while the barrel band hold the forearm in place) ![]() |
|
Hammer screw Win 1895 (wp729)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=890 This is the screw that holds the hammer in place on the Winchester model 1895 ![]() |
|
Mainspring Winchester 1895 (735)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895&pid=885 This is the Mainspring (Hammer spring) for the Winchester Model 1895 ![]() |
|
Mainspring screw Winchester 1873 / 1895 / 1866 (621)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1873_Winchester_1895&pid=882 This is the screw that holds the Hammer spring (also called mainspring) in place on the Winchester 1873 and 1895 lever action rifles. It will also fit the 1866 ![]() |
|
Musket lower wood Winchester 1895
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1895_Stocks&pid=918 This is the lower wood for the Winchester 1895 musket. ![]() |
|
Saddle Ring and Stud Winchester 1873 / 1886 / 1892 / 1894 / 1895 (wp4)
http://homesteadfirearms.com/parts/shopcart/commerce.cgi?cart_id=1320332958.1727&product=Winchester_1873_Winchester_1886_Winchester_1892_Winchester_1894_Winchester_1895&pid=805 The complete saddle ring and stud fit (screw) directly into the left receiver side of any (pre 64) 1894 or 1892, 1895, 1886, 1873 Winchester saddle ring carbine.(NOTE: the screw in type saddle ring was not installed from the factory on the model 1892's- only the u shaped staples were used on the 1892's) ![]() |
|
41 posts
• Page 1 of 2 • 1, 2
Return to Winchester Model 1895
Who is online
Users browsing this forum: No registered users and 20 guests
Winchester Owners Forum is privately owned and operated. It is not affiliated or operated by Winchester company.
Views and opinions expressed here are not necessarily that of Winchester.